Gerhardt’s Test For Ketone Bodies: Principle, Procedure and Interpretation

The term ketone bodies refers to three intermediate products of fat metabolism, namely acetone (2%), acetoacetic acid (20%) and beta-hydroxybutyrate (78%). Under normal conditions, metabolized fats are completely broken down to water and carbon dioxide, hence negligible amount (1mg/24 hrs) of ketone bodies are excreted in urine.

When the rate of production exceeds, excess ketone bodies are eliminated in urine and the condition is known as ketonuria. Two conditions most commonly associated are starvation and Diabetes mellitus. Ketonuria is also seen in case of prolonged vomiting, severe diarrhoea, anesthesia, liver damage, high fat intake and low carbohydrate intake.

Various methods are available for detecting ketones in urine:

  • Rothera’s test
  • Gerhardt’s test
  • Lang’s test
  • Lindeman’s test
  • Han’s test
  • Tablet test

The commonly used methods for ketonuria are based on the principle of Rothera’s nitroprusside test. However, other tests with different principle can also be used. Gerhardt’s Test is not very sensitive test because it can only detect about 25 to 50 mg/dl of acetoacetic acid.

Principle of Gerhardt’s test

Gerhardt’s test is based on the reaction of ferric chloride with acetoacetic acid to form a port wine or Bordeaux red color. This test detects acetoacetic acid only, Acetone and beta-hydroxybutyrate can’t be detected by this method. It also detects salicylates in urine.

Requirements

  1. Urine specimen
  2. Test tubes
  3. 10% Ferric chloride:
    (10ml of ferric chloride in 100 ml of distilled water)

Procedure of Gerhardt’s test

  1. Transfer about 3-5 ml of urine to a test tube.
  2. Add 5ml of ferric chloride drop by drop to the urine. If phosphates are present, they get precipitated as ferric phosphates.
  3. On addition of a slight excess of ferric chloride, if diacetic acid is present, Bordeaux red color will develop.
  4. To confirm the presence of acetoacetic acid, boil the test solution for 5 minutes.
  5. Observe the color change.
  6. Gerhardts-Test

Observations and Results

  • If the color disappears, then acetoacetic acid is present. The acetoacetic acid on boiling loses carbon dioxide and is converted to acetone. Acetone doesn’t react with ferric chloride.
  • If the color persists, acetoacetic acid is absent. Previous color is due to salicylates.


About Dhurba Giri 33 Articles
Dhurba Giri is the founder and content creator of LaboratoryTests.org. He is a Medical Laboratory Technologist and Scientific Blogger from Pokhara, Nepal. Connect with him:

1 Comment

Leave a Reply

Your email address will not be published.


*